As an important part of photovoltaic solar modules,portable power system solar panels play an important role in converting solar energy into electricity. However,portable power system the overall area of most solar panels is too large to be folded,portable power system and traditional solar panels are generally inconvenient to carry , During installation,portable power system it is often necessary to cooperate with supporting devices to support, and the solar panels of traditional solar panels are generally of integral structure,portable power system and the entire solar panel needs to be disassembled and maintained when damaged. Therefore, it is necessary to improve the existing technology. To solve the above problems.
Questions raised in. In order to achieve the above objectives,portable power system the present technology provides the following technical solutions: a foldable solar panel, including a mounting plate,portable power system an inner protective gasket, a partition plate, a solar panel and a support leg,portable power system and two sides of the mounting plate are respectively fixedly installed Two sets of mutually matched rotary male joints and rotary female joints. The inner protective washer is fixedly installed at the edge of the front of the mounting plate,portable power system and the inner protective washer is fixedly installed with a vertical cross partition plate,portable power system and the partition plate There is a solar panel installation slot in the installation board.
Solar panels are fixedly installed on the front of the solar panel installation groove,portable power system and rubber pads are fixedly installed on the upper surface of the intersection of the partition plates,portable power system a rotating seat is fixedly installed on the back of the mounting plate,portable power system and a rotating shaft is rotatably installed between the rotating seats , The bottom of the rotating shaft is fixedly installed with a supporting leg,portable power system and the mounting plate at the position of the supporting leg is provided with a groove, the bottom of the supporting leg is fixedly installed with a non-slip pad,portable power system and the mounting plate above the rotating shaft is fixedly installed with wiring Two sets of wiring sockets are installed on the upper surface of the wiring socket,portable power system and a power-on indicator light is installed on one side of the wiring sockets. Preferably, a bottom plate is fixedly installed at the bottom of the mounting plate,portable power system and supporting feet are fixedly installed at both ends of the bottom of the bottom plate.